GUI design

Clock and Home Automation using STONE Display

Source Node:
Time Stamp: November 11, 2021 8:27 AM - Modified On: November 11, 2021 - Published By:
Source Cluster:
Republished By Plato

Contents DescriptionGUI design 3 .Circuit Diagram CodeVideo Description In this project we are going to design a clock and a automation system with this help we can switch ON or OFF the home light and there is also clock which will show the time and date . For this we are using TFT display (STONE-HMI), this display has a software that is a GUI software with this help we are going to design interface which will contain both section clock and automation.Download the GUI software click here Clock part designing

Intelligent access control based on STONE TFT LCD and ESP32

Source Node:
Time Stamp: November 11, 2021 2:30 AM - Modified On: November 11, 2021 - Published By:
Source Cluster:
Republished By Plato

Brief Introduction Smart home is becoming more and more common with the development of technology, this article will focus on the security aspects of the intelligent access control project. This article uses STONE's touch screen to send commands to the MCU to control the relay and MFRC522 module. The principle of card reading: by driving the RFID-RC522 module, identify the ID card ID close to the ID card, and then determine whether the ID exists in the database of the word typical, ID is the typical value of the word,