lutomi shares:
Case that can accommodate Raspberry Pi 3A+ with 14x14x10 heatsink, AKASA SATA to USB adapter and 2.5inch hard drive.
Case is held together with 4 pcs of M3x30 cylinder head bolts.
Hard drive is fixed with 4 pcs of M3x6 cylinder head bolts.
Raspberry is fixed with 4 pcs of 2x5mm screws (from some broken toy).Stick few layers of insulation tape over the bolts under raspberry to avoid short circuit in case, this bolt will loosen.
To print top and bottom part, use 4mm tall modifier body to set 0 top and 0 bottom layers. Choose infill pattern and percentage you like. I recommend 0.6mm extrusion width for infill or more.
download the files on: https://www.thingiverse.com/thing:4951036
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!
Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!
LIVE CHAT IS HERE! http://adafru.it/discord
Adafruit on Instagram: https://www.instagram.com/adafruit
Shop for parts to build your own DIY projects http://adafru.it/3dprinting
3D Printing Projects Playlist:
3D Hangout Show Playlist:
Layer by Layer CAD Tutorials Playlist:
Timelapse Tuesday Playlist:
Connect with Noe and Pedro on Social Media:
Noe’s Twitter / Instagram: http://instagram.com/ecken
Pedro’s Twitter / Instagram: http://instagram.com/videopixil
